Epoxy Flooring Sydney
Beautiful Finishes
For Concrete Floors
We lay epoxy floors in garages, homes and commercial buildings across Sydney, and we seal concrete driveways. The slab is prepared properly first, and every floor comes with a written 7-year product warranty.
Epoxy Floors Are All We Do
We were painters first, and for more than fifteen years we laid epoxy floors alongside the painting. We started Evo Epoxy so people would know that this is what we do.
Along the way we were called out to a lot of coatings that had failed within a year, nearly always because the concrete was never prepared properly. So every floor we lay is ground back, repaired and moisture tested before the first coat goes on.
- The crew that quotes your floor is the crew that lays it. We do not subcontract.
- Every slab is diamond ground before it is coated.
- The quote is fixed and in writing, so the price we quote is the price you pay.
- Flake, metallic or solid colour finish
- 76 colours to choose from
- 7-year written product warranty
An Epoxy Floor Coating Built To Last
Every floor starts with diamond grinding and a moisture test, and we only use industrial grade Australian made coatings. That is why we can put a written 7-year product warranty on it.
Commercial Grade Products Only
We do not use retail kits. Our coatings are commercial grade, Australian made epoxy and polyurethane systems, and we can show you the data sheet for whatever goes on your floor.
Epoxy Floor Preparation And Full Curing Time
We do not rush a floor. Every coat gets the curing time it needs, because a coating that goes back into use too early is the one that lifts.
NSW-Wide Service
Servicing garages, warehouses and homes right across NSW.
How A Flake Epoxy Floor Coating Is Built
This is one shed, photographed at three stages. The slab is ground back, a coloured base coat goes down, then the flake is thrown into the base by hand while it is still wet. The base coat shows through between the chips, so it changes the finished floor even though you never look straight at it.
Watch a Penrith warehouse floor go from grinding to finished
Epoxy Flooring, Driveway Sealing And Line Marking From One Crew
Floor coatings are most of what we do, and the same crew handles the rest of the concrete work : line marking, wheel stops, driveway sealing and warehouse cleaning.
Epoxy Garage Floors
We coat garage floors in flake or solid colour epoxy. The floor stands up to hot tyres, wipes clean and makes the whole garage brighter.
Commercial Epoxy Flooring
We coat warehouse, workshop, kitchen and showroom floors. The slab is prepared properly first, and the work is staged around the hours you trade.
Metallic & Marble Epoxy
Metallic pigment is poured and worked through the resin by hand, so every metallic floor comes out different. It suits showrooms, entries and living areas.
Driveway Sealing & Epoxy Driveways
We clean, repair and seal tired concrete driveways with a UV stable sealer, and we lay epoxy stencil, flake and solid colour finishes on driveways, patios and pool surrounds.
Flake Epoxy Flooring
Flake epoxy floors for garages, sheds and workshops across the Hills District, North West Sydney and greater Sydney.
Exposed Aggregate Restoration
Flat, grey exposed aggregate brought back across Sydney. We do a test patch first, so you see the result before the whole driveway is done. An exposed aggregate driveway loses its look when the cement paste around the top of the stone wears away and the old sealer disappears. A driveway that used to look wet and rich turns flat and grey. We grind the surface back to sound concrete, which brings the stone forward again, polish it with a second, finer pass and then reseal it, after a test patch so you see the result first. A film forming sealer brings back the colour and the wet look most people want on exposed aggregate. None of that is structural, so most tired driveways do not need replacing.Read more
Epoxy Flooring Colours
Every floor goes through the same steps, whatever finish you choose.
BeforeAfterWhy Our Epoxy Flooring Lasts
Rolling a coating onto bare concrete is the easy part. We prepare the slab first, then choose a system that suits the floor, whether it has to take hot tyres, forklifts or chemicals, and we pick it to look good as well.
The Team
Kian Khadivi pushed to start it and runs the jobs, so he is the one who comes out, quotes your floor and is there while it goes down. Nasser has been on the tools since 2001 and works alongside him on every job.
Preparation Comes First
Coatings fail at the bond, not in the coating itself. Every Evo floor is diamond ground back to open concrete, the cracks are repaired and the slab is moisture tested before any epoxy goes down.
76 Epoxy Floor Colours
Choose from 76 colours across flake, metallic and solid finishes , and we bring the samples to your floor before you decide.
Real Dates, And We Keep Them
We give you real dates. You will know when we arrive, how long we need, and when you can walk on the floor and park on it.
Fixed Written Pricing
We come out, look at the floor and give you a fixed written quote. No obligation.
One Crew From Quote To Warranty
Your quote, your floor and your warranty all sit with one team. The people who quote the floor are the people who lay it, and we do not subcontract.
Flake, Metallic Or Solid Colour Epoxy Flooring
There are three main finishes, and each one suits a different floor. A flake epoxy floor has coloured chips thrown by hand into the wet base coat. We can lay full flake, partial flake or no flake at all, and the base colour shows through between the chips. A metallic epoxy floor has the pigment poured and worked through the resin by hand, so no two metallic floors come out the same. It suits showrooms, entries and living areas. A solid colour epoxy floor is one even colour, with no chips or pattern.
We bring the samples to your floor, so you can see each finish in your own light before you decide.Read more
Our Recent Epoxy Flooring Projects In Sydney
Garages, sheds, workshops and driveways across the Hills District and North West Sydney, photographed on the day we handed them back.
Rated 5 Stars Across Sydney
From Quote To Cured In Four Steps
Get a Free Quote#1. Free Site Assessment
We inspect your slab, measure up, test for moisture and talk through finishes. You get a fixed written quote within one business day.
#2. Surface Preparation
We prepare the slab by diamond grinding it back to clean, open concrete, then we cut out and fill the cracks and chips and degrease any oil. It is the part nobody sees, and it is the reason the floor lasts.
#3. Coating & Finishing
The primer goes down first, then the body coats with the flake or metallic worked in, then the top coat. Each layer is left to cure before the next one goes on.
#4. Handover & Warranty
We walk the floor with you and hand over the care guide and your written 7-year product warranty. You can walk on the floor after about 24 hours, and our working figure for parking on it is 72 hours.
Line Marking For Car Parks, Warehouses And Workshops
The same crew that lays your epoxy floor can mark it out. We use APC EPO100L, a two pack line marking epoxy made for floors and walls, in the standard Australian safety colours. It is the right finish for car park bays, walkways, forklift aisles and work zones. Where a line needs to be slip resistant, silica sand or crushed glass is added to the coating. Line marking can go down as part of a new floor or on its own over an existing slab.
Epoxy Flooring For Strata Car Parks And Common Areas
We coat basement car parks, bin rooms and common areas in apartment blocks, and we quote for the building manager or the strata committee. Grinding concrete is loud, so in a residential building the preparation is done during the day. We keep dust and noise to manageable levels, and we work within local noise restrictions and the site's safety requirements. Bays, arrows and walkways can be line marked in the same visit.
Ready To Talk About Your Epoxy Floor?
Ready To Talk About Your Epoxy Floor?
Send us a few details about the floor and we will come back within one business day with a fixed written quote.
Frequently Asked Questions
How Long Does An Epoxy Floor Last?
A properly prepared epoxy floor lasts for years, and the preparation is what decides it. Most failed floors we get called out to were coated onto concrete that was never prepared properly. Every Evo floor is diamond ground and moisture tested before the first coat goes down.
Every floor also comes with a written 7-year product warranty.
What Are The Downsides Of Epoxy Flooring?
Epoxy needs time to cure, so the floor is out of use for a few days. Our working figure is 72 hours before it goes back into normal use, and a fast cure system is available if you need the space sooner. A glossy epoxy floor can also be slippery when wet. An anti-slip additive fixes that, and for areas that need slip certification we add quartz for a P4 slip rating.
Is Epoxy Good For Garage Floors?
Yes. An epoxy garage floor stands up to hot tyres, wipes clean and makes the garage brighter. We lay flake or solid colour epoxy on garage floors, finished with a polyurethane sealer that resists UV and discolouration.
What Is The Difference Between The Two Epoxy Floor Sealers?
We finish most floors with one of two sealers. Polyurethane is the standard for homes: it stops discolouration, protects from UV and adds a layer of hardness. Polyaspartic is the heavier duty option, with more chemical and impact resistance, so it suits commercial floors and areas with more foot traffic.
Can Epoxy Go Outdoors?
Yes. We lay epoxy on driveways, patios and pool surrounds. The UV stable topcoat is what protects an outdoor epoxy floor from the sun.
Do You Do Commercial Epoxy Flooring?
Yes. We coat floors in shops, showrooms, commercial kitchens, workshops and small factory and warehouse units. The slab is prepared properly first, and the work is staged around the hours you trade.
How Much Does Epoxy Flooring Cost?
It depends on the size of the floor, the condition of the slab and the finish you choose. We quote on site, in writing, and the price we quote is the price you pay. Our epoxy flooring cost page explains what changes the price.
How Many Epoxy Floor Colours Can I Choose From?
Evo Epoxy works with 76 epoxy floor colours in Sydney: 32 pre-mixed flake blends, 12 metallic pigments, 16 standard solid colours held in stock and 16 special order solid colours. Under every flake and metallic floor sits a base coat tinted from APC's range of 206 AS2700 colours, so the combinations run well past 76. Every solid colour carries its RAL or AS2700 code.
Get A Free Epoxy Flooring Quote
Tell us about your floor and we will come back fast with an upfront price. Servicing garages, warehouses and homes right across NSW.
Send us a few details about the floor and we will come back within one business day with a fixed written quote.
0468 333 881
Call or text
Service area
All of New South Wales
7-Year Product Warranty
Written warranty
sales@evoepoxy.com.au
Email us